Dzhumaev P.S.

Dzhumaev Pavel S.

Degree: Candidate of Sciences (PhD) in Technology

Associate Professor

Division of Nuclear Physics and Technologies, Office of Academic Programs (411) / Institute of Nuclear Physics and Engineering
Works at MEPhI since 2007
Work Experience: 12 years

Education

2004 — National Research Nuclear University MEPhI

Courses

1. Experimental Methods of Materials Science
2. Fusion Reactor Materials
3. Interaction of Light and Matter
4. Introduction to the Profession
5. Methods Of Nuclear Energy Materials Research
6. Modern Methods of Materials Study
7. Modern methods of researching the states of materials
8. Modern Research Methods of the State of Materials
9. Modification of Materials
10. Physical Methods of Materials Research
11. Physical Principles of Radiation and Solids Interaction
12. Practical Training (Research Work)
13. Radiation Damage And Effects In Nuclear Materials
14. Radiation Physics of Solids
15. Radiation solid state physics
16. Solid State Reactions and Corrosion of Materials
17. Special Issues of Material Fusion Reactor

Publication activity

3
h-index (Web of Science)
4
h-index (Scopus)
  1. Article
    Web of Science & Scopus
    Microstructure and mechanical properties of stainless steel 316L obtained by Direct Metal Laser Deposition // Journal of Physics: Conference Series, 2019 Vol. 1238, No. 1, Q4 doi
  2. Article
    Web of Science & Scopus
    Laser Milling Ceramics Dioxide Zirconium and Disilicate of Lithium // Journal of Physics: Conference Series, 2019 Vol. 1238, No. 1, Q4 doi
  3. Article
    Web of Science & Scopus
    Thermal fatigue damage of steel joints brazed with various nickel filler metals // Non-ferrous Metals, 2019 Vol. 46, No. 1, Q2 pp. 33-39 doi
  4. Article
    Web of Science & Scopus
    Ferromagnet/Superconductor Hybrid Magnonic Metamaterials // Advanced Science, 2019 Vol. 6, No. 16, TOP1 doi
  5. Article
    Web of Science & Scopus
    Applying Scanning Contact Potentiometry for Monitoring Incipient Cracks in Steels // Russian Journal of Nondestructive Testing, 2019 Vol. 55, No. 1, Q3 pp. 59-67 doi
  6. Article
    Web of Science & Scopus
    Experimental investigation of the failure of steel AISI 316 by the methods of structural analyses // Letters on Materials, 2019 Vol. 9, No. 1, Q3 pp. 33-38 doi
  7. Article
    Web of Science & Scopus
    Direct metal laser deposition of titanium powder Ti-6Al-4V // Journal of Physics: Conference Series, 2018 Vol. 941, No. 1 doi
  8. Article
    Web of Science & Scopus
    Effect of heat treatment on phase transformations and magnetization of amorphous Co69Fe4Cr4Si12B11 microwires // Journal of Alloys and Compounds, 2018 Vol. 741, TOP10 pp. 648-655 doi
  9. Article
    Web of Science & Scopus
    Synthesis of Titanium Nanoparticles in Liquid Xenon by a High-Voltage Discharge // Technical Physics Letters, 2018 Vol. 44, No. 7, Q3 pp. 637-639 doi
  10. Article
    Web of Science & Scopus
    Normal and grazing incidence pulsed laser deposition of nanostructured MoSx hydrogen evolution catalysts from a MoS2 target // Optics and Laser Technology, 2018 Vol. 102, Q1 pp. 74-84 doi
  11. Article
    Web of Science & Scopus
    The Effect of Boron on the Structure and Conductivity of Thin Films Obtained by Laser Ablation of Diamond with Deposition at 700A degrees C // Technical Physics Letters, 2018 Vol. 44, No. 6, Q3 pp. 511-514 doi
  12. Article
    Web of Science & Scopus
    Joining of tungsten with low-activation ferritic–martensitic steel and vanadium alloys for demo reactor // Nuclear Materials and Energy, 2018 Q1 doi
  13. Article
    Web of Science & Scopus
    Application of pulsed laser deposition in reactive gaseous media to fabricate an effective hybrid MoSx/WOy catalyst for the reaction of hydrogen evolution // Inorganic Materials: Applied Research, 2018 Vol. 9, No. 2, Q3 pp. 297-304 doi
  14. Article
    Web of Science & Scopus
    Probing dynamics of micro-magnets with multi-mode superconducting resonator // Journal of Applied Physics, 2018 Vol. 123, No. 17, Q2 doi
  15. Article
    Web of Science & Scopus
    Purification of Liquid Xenon with the Spark Discharge Technique for Use in Two-Phase Emission Detectors // Instruments and Experimental Techniques, 2017 Vol. 60, No. 6, Q4 pp. 782-788 doi
  16. Article
    Web of Science & Scopus
    The influence of the local atomic packing of thin MoS (x) films on their electrocatalytic properties in hydrogen reduction // TECHNICAL PHYSICS LETTERS, 2017 Vol. 43, No. 8, Q3 pp. 770-773 doi
  17. Article
    Web of Science & Scopus
    Effect of self-ion irradiation on the microstructural changes of alloy EK-181 in annealed and severely deformed conditions // Journal of Nuclear Materials, 2017 Vol. 487, Q1 pp. 96-104 doi
  18. Article
    Web of Science & Scopus
    Investigation of microstructure and thermal stability of pulsed plasma processed chromium ferritic-martensitic steels // IOP Conference Series: Materials Science and Engineering, 2016 Vol. 130, No. 1 doi
  19. Article
    Web of Science & Scopus
    Influence of the pulsed plasma treatment on the corrosion resistance of the low-alloy steel plated by Ni-based alloy // IOP Conference Series: Materials Science and Engineering, 2016 Vol. 130, No. 1 doi
  20. Article
    Web of Science & Scopus
    Increasing corrosion resistance of carbon steels by surface laser cladding // IOP Conference Series: Materials Science and Engineering, 2016 Vol. 130, No. 1 doi
  21. Article
    Web of Science & Scopus
    Selection of materials for tokamak plasma facing elements based on a liquid tin capillary pore system // Journal of Physics: Conference Series, 2016 Vol. 748, No. 1 doi
  22. Article
    Web of Science & Scopus
    Microstructure modification and surface hardening of 12% chromium steels by pulsed gas plasma flows // Russian Metallurgy (Metally), 2016 Vol. 2016, No. 1, Q3 pp. 45-51 doi
  23. Article
    Web of Science & Scopus
    Study of EBSD Experiment Parameters Influence on Computation of Polycrystalline Pole Figures and Orientation Distribution Function // MATEC Web of Conferences, 2016 Vol. 75 doi
  24. Article
    Web of Science & Scopus
    Properties of multilayer coatings produced by coaxial laser cladding // Journal of Physics: Conference Series, 2016 Vol. 747, No. 1 doi
  25. Article
    Web of Science & Scopus
    Influence of the chemical composition of rapidly quenched amorphous alloys (Ni, Fe, Cr)-B-Si on its crystallization process // IOP Conference Series: Materials Science and Engineering, 2016 Vol. 130, No. 1 doi
  26. Article
    Web of Science & Scopus
    Analysis of microstructure and properties of multilayer coatings produced by laser cladding // Journal of Physics: Conference Series, 2016 Vol. 691, No. 1 doi
  27. Article
    Web of Science & Scopus
    Development of the recovery technology for nickel superalloy blades of the aircraft engine by laser cladding // Journal of Physics: Conference Series, 2016 Vol. 747, No. 1 doi
  28. Article
    Web of Science & Scopus
    Influence of structural-phase state of ferritic-martensitic steels on the helium porosity development // IOP Conference Series: Materials Science and Engineering, 2016 Vol. 130, No. 1 doi
  29. Article
    Web of Science & Scopus
    Capabilities to improve corrosion resistance of fuel claddings by using powerful laser and plasma sources // Physics of Atomic Nuclei, 2016 Vol. 79, No. 14, Q3 pp. 1656-1662 doi
  30. Article
    MEPhI publication
    On the Capabilities of Improving the Corrosion Resistance of Fuel Claddingby Using High-Power Laser and Plasma Sources // Nuclear Physics and Engineering, 2015 Vol. Т. 6, No. № 11-12 pp. 643-650
  31. Article
    Web of Science & Scopus
    Surface hardening of structural materials by laser cladding with nickel alloys // Non-ferrous Metals, 2015 Vol. 2015, No. 1, Q4 pp. 50-55 doi
  32. Article
    Web of Science & Scopus
    The use of atomic-force microscopy for studying the crystallization process of amorphous alloys // Physics Procedia, 2015 Vol. 72 pp. 253-257 doi
  33. Article
    Web of Science & Scopus
    Surface hardening of construction materials by method of laser cladding of heat-resistant nickel alloys // Tsvetnye Metally, 2015 Vol. 2015, No. 3, Q3 pp. 31-36 doi
  34. Article
    Web of Science & Scopus
    Change of phase composition of metals by the radiation of the fiber laser for management of their magnetic characteristics // Journal of Physics: Conference Series, 2015 Vol. 594, No. 1 doi
  35. Article
    Web of Science & Scopus
    Structure formation and properties of weld overlay produced by laser cladding under the influence of nanoparticles of high-melting compounds // Physics Procedia, 2015 Vol. 71 pp. 202-206 doi
  36. Article
    Web of Science & Scopus
    Modification of the structural-phase state of titanium alloys by concentrated energy flows // Tsvetnye Metally, 2015 Vol. 2015, No. 11, Q3 pp. 57-62 doi
  37. Article
    Web of Science & Scopus
    Surface modification of low activation ferritic-martensitic steel EK-181 (Rusfer) by high temperature pulsed plasma flows // Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 2015 Q2 doi
  38. Article
    Web of Science & Scopus
    Formation of multilayer claddings using high-power fiber laser radiation // Physics Procedia, 2015 Vol. 71 pp. 227-231 doi
  39. Article
    MEPhI publication
    Influence of Additions of TaC Nanoparticles on a Microstructure of Laser Claddings // Nuclear Physics and Engineering, 2014 Vol. Т. 5, No. N 1 pp. 49-56
  40. Article
    MEPhI publication
    Specific Features of Laser Welding of a Molybdenum Alloy and Metallographic Studies of Welded Connections // Nuclear Physics and Engineering, 2014 Vol. Т. 5, No. N 3 pp. 264-269
  41. Article
    Web of Science & Scopus
    Processing Features of Laser Facing Structure Formation Using Powerful Fiber Laser Radiation // Metal Science and Heat Treatment, 2014 Q3 doi
  42. Article
    Web of Science & Scopus
    Surface alloying of thin-walled metallic tube fragments using pulsed gas plasma flows // Russian Metallurgy (Metally), 2014 Vol. 2014, No. 7, Q3 pp. 561-568 doi

The agreement on processing personal data is obtained in accordance with the Federal Law "On Personal Data" from 27/07/2006 N 152-FZ