Personalities of MEPhI
NRNU MEPhI National Research Nuclear University MEPhI
  1. Faculty and Staff
  2. Sevryukov O.N.
Sevryukov O.N.

Sevryukov Oleg N.

Degree: Candidate of Sciences (PhD) in Technology

Associate Professor

Department of Physical Issues in Materials Science
  • Б-104
  • 9658
Send message Autumn 2024. Schedule
Works at MEPhI since 1992
Work Experience: 46 years

Education

1976 — Moscow State University

Courses

1. Fundamentals of materials science
2. Practical Training (Research Work)
3. Prospective technologies of making materials (part 1)

Publication activity

6
h-index (Web of Science)
11
h-index (Scopus)
11
h-index (РИНЦ)

Showing publications for last 3 years

  1. Article
    Web of Science & Scopus
    Brazing of ZTA ceramic with titanium for biomedical application // International Journal of Advanced Manufacturing Technology, 2024 doi
  2. Article
    Web of Science & Scopus
    Interaction of iron melt with tungsten and WFe composite structure evolution // Nuclear Energy and Technology, 2024 Vol. 10, No. 3 pp. 189-198 doi
  3. Article
    Web of Science & Scopus
    Vacuum brazing of AA 6082 aluminum alloy and AISI 304 stainless steel with Ti coating using rapidly quenched Al-Ge-Si system filler alloy // AIP Conference Proceedings, 2024 Vol. 3154, No. 1, Q4 doi
  4. Article
    Web of Science & Scopus
    Corrosion of reduced activation ferritic-martensitic steel – Tungsten brazed joints in liquid lithium // Fusion Engineering and Design, 2023 Vol. 196, Q2 doi
  5. Article
    Web of Science & Scopus
    Joining Stainless-Steel AISI 304 and High-Strength Aluminum Alloy AA 6082 by Brazing Using Al-Ge-Si Foils // Metals, 2023 Vol. 13, No. 1, Q2 doi
  6. Article
    Web of Science & Scopus
    Corrosion and electrochemical behavior of CoСrFeNiMo high-entropy alloy in acidic oxidizing and neutral chloride solutions // Materials Chemistry and Physics, 2023 Vol. 295, Q1 doi
  7. Article
    Web of Science & Scopus
    Active Brazing of Silicon Carbide with Rapidly Quenched TiZrCuBe Filler Metal // Journal of Materials Engineering and Performance, 2023 Q2 doi
  8. RSCI REGULARITIES OF FORMATION OF COMPOUNDS OF CORROSION-RESISTANT STEEL AISI 304 AND HIGH-STRENGTH ALUMINUM ALLOY AA 6082 OBTAINED BY VACUUM SOLDERING USING QUICK-HARDENED SOLDERS OF THE Al-Ge-Si SYSTEMREGULARITIES OF FORMATION OF COMPOUNDS OF CORROSION-RESISTANT STEEL AISI 304 AND HIGH-STRENGTH ALUMINUM ALLOY AA 6082 OBTAINED BY VACUUM SOLDERING USING QUICK-HARDENED SOLDERS OF THE Al-Ge-Si SYSTEM // 2022 pp. 220-221
  9. RSCI BRAZING OF PACKED PIEZOPOWER ELEMENTS WITH AL-BASED BRAZING ALLOY STEMET®1502BRAZING OF PACKED PIEZOPOWER ELEMENTS WITH AL-BASED BRAZING ALLOY STEMET®1502 // 2022 pp. 217-219
  10. RSCI STUDY OF THE SiC/SiC BRAZED JOINTS MICROSTRUCTURE EVOLUTION DURING HIGH-TEMPERATURE HEAT TREATMENTSTUDY OF THE SiC/SiC BRAZED JOINTS MICROSTRUCTURE EVOLUTION DURING HIGH-TEMPERATURE HEAT TREATMENT // 2022 pp. 211-212
  11. RSCI EXPERIENCE IN THE DEVELOPMENT OF QUICK-HARDENED SOLDERS AT MEPHIEXPERIENCE IN THE DEVELOPMENT OF QUICK-HARDENED SOLDERS AT MEPHI // 2022 pp. 45-45
  12. RSCI SEARCHING FOR OPTIMAL MODES OF PRODUCING BULK AMORPHOUS-CRYSTALLINE ALLOYS FROM Zr35Ti30Be27,5Cu7,5 POWDER BY SPS METHODSEARCHING FOR OPTIMAL MODES OF PRODUCING BULK AMORPHOUS-CRYSTALLINE ALLOYS FROM Zr35Ti30Be27,5Cu7,5 POWDER BY SPS METHOD // 2022 pp. 181-184
  13. Article
    Web of Science & Scopus
    EFFECT OF HEAT TREATMENT ON THE PROPERTIES OF RAPIDLY QUENCHED Al – Ge – Si ALLOYS // Tsvetnye Metally, 2022 Vol. 2022, No. 10, Q3 pp. 58-65 doi
  14. RSCI APPLICATION OF THE AL-GE-SI SYSTEM FILLER ALLOYS FOR OBTAIN JOINTS OF STAINLESS STEEL AISI 304 AND HIGH-STRENGTH ALUMINUM ALLOY AA6082APPLICATION OF THE AL-GE-SI SYSTEM FILLER ALLOYS FOR OBTAIN JOINTS OF STAINLESS STEEL AISI 304 AND HIGH-STRENGTH ALUMINUM ALLOY AA6082 // 2022 pp. 388-391
  15. RSCI APPLICATION OF BRAZING TECHNOLOGY TO OBTAIN JOINTS FROM SILICON CARBIDEAPPLICATION OF BRAZING TECHNOLOGY TO OBTAIN JOINTS FROM SILICON CARBIDE // 2022 pp. 315-319
  16. RSCI OBTAINING BULK AMORPHOUS-CRYSTALLINE PRODUCTS BY THE DED METHODOBTAINING BULK AMORPHOUS-CRYSTALLINE PRODUCTS BY THE DED METHOD // 2022 pp. 185-189
  17. Article
    Web of Science & Scopus
    EFFECT OF BERYLLIUM ON THE MORPHOLOGY OF INITIAL INGOTS AND THE STRUCTURAL PHASE STATE OF FAST-QUENCHED STEMET 1108 BRAZING ALLOY RIBBONS // Tsvetnye Metally, 2022 Vol. 2022, No. 10, Q3 pp. 66-71 doi
  18. RSCI PROPERTIES OF THE Al-Ge-Si SYSTEM ALLOYS OBTAINED IN THE FOIL FORM BY RAPIDLY QUENCHING TECHNOLOGY OF THE MELTED ALLOYPROPERTIES OF THE Al-Ge-Si SYSTEM ALLOYS OBTAINED IN THE FOIL FORM BY RAPIDLY QUENCHING TECHNOLOGY OF THE MELTED ALLOY // 2022 pp. 130-131
  19. Article
    Web of Science & Scopus
    ANALYSIS OF CuCrZr/316L(N) BIMETALLIC JOINT WITH AND WITHOUT NICKEL INTERLAYER FOR PLASMA-FACING COMPONENTS // Materials Physics and Mechanics, 2022 Vol. 48, No. 2, Q3 pp. 184-198 doi
  20. Article
    Web of Science & Scopus
    Experimental and numerical analysis of filler metal STEMET 1301A for connection of molybdenum with steel 12CR18NI10TI (Withdrawal of Vol 295, art no 116683, 2020) // JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2021 Vol. 295, TOP10 doi
  21. RSCI Influence of copper content and external actions on shape memory effect in rapidly quenched TiNiCu ALLOYS // 2021 pp. 181-182
  22. Article
    Web of Science & Scopus
    Microstructure and defect-based fatigue mechanism evaluation of brazed coaxial ti/al2o3 joints for enhanced endoprosthesis design // Materials, 2021 Vol. 14, No. 24, Q2 doi
  23. Article
    Web of Science & Scopus
    Development of rapidly-quenched al-ge-si filler alloys for the joining of stainless steel aisi 304 and aluminum alloy aa6082 // Metals, 2021 Vol. 11, No. 12, Q2 doi
  24. Article
    Web of Science & Scopus
    Effect of aluminum alloying on the structure and properties of rapidly quenched TiNiCu alloy // Journal of Physics: Conference Series, 2021 Vol. 2056, No. 1, Q4 doi
  25. Article
    Web of Science & Scopus
    Influence of copper content and thermal treatment on shape memory effect in rapidly quenched TiNiCu alloys // Journal of Physics: Conference Series, 2021 Vol. 2036, No. 1, Q4 doi
  26. Article
    Web of Science & Scopus
    Brazing tungsten/tantalum/RAFM steel joint for DEMO by fully reduced activation brazing alloy 48Ti-48Zr-4Be // Metals, 2021 Vol. 11, No. 9, Q2 doi
  27. Article
    Web of Science & Scopus
    Simulated thermal tests of a molybdenum/graphite X-ray target manufactured with a novel Ti-Zr-Nb-Be powder filler metal: an investigation of the brazed joint evolution under operating conditions // Journal of Manufacturing Processes, 2021 Vol. 69, Q1 pp. 142-151 doi
  28. Article
    Web of Science & Scopus
    Overview of nickel-based filler metals for brazing of austenitic stainless steels // Non-ferrous Metals, 2021 No. 1, Q3 pp. 41-56 doi
  29. Article
    Web of Science & Scopus
    Study of the microstructure and thermomechanical properties of Mo/graphite joint brazed with Ti–Zr–Nb–Be powder filler metal // Journal of Materials Science, 2021 Q1 doi
  30. Article
    Web of Science & Scopus
    Shape memory behavior of rapidly quenched high-copper tinicu alloys // U.Porto Journal of Engineering, 2021 Vol. 7, No. 2, Q4 pp. 2-10 doi
  31. Article
    Web of Science & Scopus
    Overview of the mechanical properties of tungsten/steel brazed joints for the demo fusion reactor // Metals, 2021 Vol. 11, No. 2, Q2 pp. 1-11 doi
  32. Article
    Web of Science & Scopus
    Joining tungsten with steel for DEMO: Simultaneous brazing by Cu-Ti amorphous foils and heat treatment // Fusion Engineering and Design, 2021 Q2 doi
  33. Article
    Web of Science & Scopus
    Diffusion brazing of stainless steels influence of Ni-B filler alloy composition // Welding in the World, 2021 Q2 doi

Showing conferences for last 3 years

Conferences not found

Повышение квалификации

March 19, 2018 — March 30, 2018 Development of a system for assessing professional qualifications in the nuclear industry (25 hours) NRNU MEPhI
February 05, 2018 — December 16, 2019 Information and communication technologies in education (Modules 1-4) (108 hours) NRNU MEPhI, Moscow
October 07, 2014 — November 26, 2014 Improving the teaching skills of CPD: internationalization of education (third level of education) (72 hours) NRNU MEPhI
May 05, 2014 — June 24, 2014 Improving the teaching skills of CPD: internationalization of education (second level of education) (72 hours) NRNU MEPhI, Moscow
November 01, 2013 — November 28, 2013 Improving teaching excellence in CPD: internationalizing education (72 hours) NRNU MEPhI, Moscow
June 11, 2010 — July 02, 2010 Course "Physical Foundations of Nanotechnology" (72 hours) NRNU MEPhI, Moscow
October 04, 2007 — December 04, 2007 Modernization of engineering education, taking into account the requirements of the professional industry community (72 hours) ANO educational research center "Kurchatov Institute", Moscow
February 02, 2004 — March 17, 2004 Theory and practice of creating a quality management system at an enterprise that meets the requirements of the standard (180 hours) Consulting center "KAMEK", Moscow
February 01, 2004 — April 15, 2004 Theory and practice of conducting an internal audit of a quality management system (40 hours) Consulting center "KAMEK", Moscow

Профессиональная переподготовка

October 01, 1988 — March 31, 1989 Amorphous materials and precision alloys (720 hours) Special faculty for retraining of personnel of the Moscow Institute of Steel and Alloys, Moscow

Traineeships

Internship at the Smolensk NPP from 02 to 04 Dec 2019

Internship at Balakovo NPP, 17.06. - 18.06.2015

Grants

Jan 2021 — Dec 2023 "Influence of microstructure on the mechanisms of destruction of AA6082 / AISI 304 joints under the action of static and cyclic loads, depending on the chemical composition of AlGeSi system solder alloys and temperature-time modes" RFBR
Oct 2019 — Sep 2021 "Influence of the elemental composition of amorphous-crystalline nickel filler alloys on the evolution of the structural-phase state of brazed joints from high-alloy steels" RFBR grant
Jan 2019 — Dec 2021 "Influence of the features of the amorphous state and high-speed crystallization of rapidly quenched alloys of the quasi-binary system TiNi-TiCu on structure formation, phase transformations and shape memory effects" RSF

Членство в редколлегиях научных журналов

from Sep 2002 Svarochnoe proizvodstvo

The agreement on processing personal data is obtained in accordance with the Federal Law "On Personal Data" from 27/07/2006 N 152-FZ