Personalities of MEPhI
NRNU MEPhI National Research Nuclear University MEPhI
  1. Faculty and Staff
  2. Petrovskiy V.N.
Petrovskiy V.N.

Petrovskiy Viktor N.

Degree: Candidate of Sciences (PhD) in Physics and Mathematics

Associate Professor

Department of Laser Physics (37, ЛаПлаз КАФ.37)
  • К-1105
  • 9392
Send message Spring 2024. Schedule
Works at MEPhI since 1971
Work Experience: 43 years

Education

1971 — National Research Nuclear University MEPhI

Courses

1. Academic practice (industry, technology)
2. Approbation of scientific results
3. Experimental Academic Research Work
4. Fiber Lasers
5. Post-graduate research and writing of scientific qualification work (dissertation) for seekers of “Candidate of Sciences” deegree
6. Practical Training (Research Work)
7. Principles of Atomic and Molecular Spectroscopy
8. Quantum Radiophysics
9. Research activities and thesis preparation
10. Workshop in Laser Physics
11. Workshop: obtaining professional skills and experience of professional activities (scientific practice)

Publication activity

10
h-index (Web of Science)
7
h-index (Scopus)
11
h-index (РИНЦ)

Showing publications for last 3 years

  1. Article
    Web of Science & Scopus
    Direct nanosecond laser metallization of AlN ceramics // Laser Physics Letters, 2024 Vol. 21, No. 5 doi
  2. Article
    Web of Science & Scopus
    Influence of Deformation and Thermal Effects on the Formation of Metastable Structural States in Fe–18 Cr–10 Ni Alloy // Physics of Atomic Nuclei, 2023 Vol. 86, No. 9 pp. 2109-2114 doi
  3. Article
    Web of Science & Scopus
    Optimization of Parameters for Laser Heat Treatment with Oscillating Beam for Treating Surfaces with Random Profile by Power Modulation // Physics of Atomic Nuclei, 2023 Vol. 86, No. 11 pp. 2471-2477 doi
  4. Article
    Web of Science & Scopus
    Mechanical Properties of Composite Materials Based on Fe – 18% Cr – 10% Ni Alloy Obtained Using Laser Heat Treatment // Metal Science and Heat Treatment, 2023 Vol. 65, No. 5-6, Q3 pp. 279-284 doi
  5. RSCI STUDY OF MECHANICAL PROPERTIES OF FUNCTIONAL-GRADIENT MATERIALS WITH DIFFERENT PHASE CONTENT OBTAINED BY LASER PROCESSINGSTUDY OF MECHANICAL PROPERTIES OF FUNCTIONAL-GRADIENT MATERIALS WITH DIFFERENT PHASE CONTENT OBTAINED BY LASER PROCESSING // 2023 pp. 100
  6. RSCI COMPUTER MODELING OF THERMAL FIELDS IN SEMICONDUCTORS UNDER THE INFLUENCE OF NANOSECOND LASER PULSES, TAKING INTO ACCOUNT THE HYDRODYNAMIC EFFECTSCOMPUTER MODELING OF THERMAL FIELDS IN SEMICONDUCTORS UNDER THE INFLUENCE OF NANOSECOND LASER PULSES, TAKING INTO ACCOUNT THE HYDRODYNAMIC EFFECTS // 2023 pp. 101
  7. RSCI CREATION OF THREE-DIMENSIONAL AMORPHOUS STRUCTURES BY DIRECT ENERGY DEPOSITIONCREATION OF THREE-DIMENSIONAL AMORPHOUS STRUCTURES BY DIRECT ENERGY DEPOSITION // 2023 pp. 47
  8. RSCI SOLVING AN INVERSE HEAT CONDUCTION PROBLEM TO OBTAIN THE ENERGY DISTRIBUTION DURING LASER SURFACE PROCESSING WITH A SCANNING BEAMSOLVING AN INVERSE HEAT CONDUCTION PROBLEM TO OBTAIN THE ENERGY DISTRIBUTION DURING LASER SURFACE PROCESSING WITH A SCANNING BEAM // 2023 pp. 46
  9. RSCI COMPUTER SIMULATION OF WAVEGUIDE FORMATION FROM A WATER JETCOMPUTER SIMULATION OF WAVEGUIDE FORMATION FROM A WATER JET // 2023 pp. 91
  10. Article
    Web of Science & Scopus
    Determining the Size of the Hardening Zone by Temperature Fields during Laser Processing // Physics of Atomic Nuclei, 2022 Vol. 85, No. 12, Q4 pp. 2092-2098 doi
  11. Article
    Web of Science & Scopus
    Determination of the Diameter and Depth of Substance Ablation Craters during Nanosecond Laser Pulses Using Computer Modeling // Physics of Atomic Nuclei, 2022 Vol. 85, No. 11, Q4 pp. 1913-1919 doi
  12. RSCI THE USE OF SYNCHROTRON RADIATION FOR THE DIAGNOSIS OF MATERIALS OBTAINED USING ADDITIVE TECHNOLOGIESTHE USE OF SYNCHROTRON RADIATION FOR THE DIAGNOSIS OF MATERIALS OBTAINED USING ADDITIVE TECHNOLOGIES // 2022 pp. 36-38
  13. Article
    Web of Science & Scopus
    Pore healing effect of laser polishing and its influence on fatigue properties of 316L stainless steel parts fabricated by laser powder bed fusion // Optics and Laser Technology, 2022 Vol. 156, Q1 doi
  14. RSCI INFLUENCE OF DIFFERENT SUBSTRATES ON THE FORMATION OF A WELD ROOT DURING LARGE THICKNESS STEEL LASER WELDINGINFLUENCE OF DIFFERENT SUBSTRATES ON THE FORMATION OF A WELD ROOT DURING LARGE THICKNESS STEEL LASER WELDING // 2022 pp. 83
  15. RSCI COMPUTER SIMULATION OF THERMAL FIELDS IN A CONDUCTORS AND SEMICONDUCTORS UNDER THE INFLUENCE OF NANOSECOND LASER PULSESCOMPUTER SIMULATION OF THERMAL FIELDS IN A CONDUCTORS AND SEMICONDUCTORS UNDER THE INFLUENCE OF NANOSECOND LASER PULSES // 2022 pp. 69
  16. RSCI INFLUENCE OF DIFFERENT SUBSTRATES ON THE FORMATION OF A WELD ROOT DURING LARGE THICKNESS STEEL LASER WELDINGINFLUENCE OF DIFFERENT SUBSTRATES ON THE FORMATION OF A WELD ROOT DURING LARGE THICKNESS STEEL LASER WELDING // 2022 pp. 80
  17. RSCI LASER WELDING OF COPPER PLATES 1.5 MM THICKNESSLASER WELDING OF COPPER PLATES 1.5 MM THICKNESS // 2022 pp. 81
  18. RSCI LASER WELDING WITH AXIAL POWDER FEED IN GAP BUTT WELDING OF STEEL PLATES 2.5 MM THICKNESSLASER WELDING WITH AXIAL POWDER FEED IN GAP BUTT WELDING OF STEEL PLATES 2.5 MM THICKNESS // 2022 pp. 82
  19. RSCI EFFECT OF TEXTURE TYPE ON THE WETTABILITY OF SILICON DURING DIRECT NANOSECOND LASER WRITINGEFFECT OF TEXTURE TYPE ON THE WETTABILITY OF SILICON DURING DIRECT NANOSECOND LASER WRITING // 2022 pp. 90
  20. RSCI METHOD OF CALCULATING THE CONTACT ANGLE OF WETTING WITH DIRECT LASER STRUCTURING BY NANOSECOND PULSEDMETHOD OF CALCULATING THE CONTACT ANGLE OF WETTING WITH DIRECT LASER STRUCTURING BY NANOSECOND PULSED // 2022 pp. 132-133
  21. RSCI OBTAINING A GIVEN ENERGY DISTRIBUTION DURING LASER SURFACE PROCESSING WITH A SCANNING BEAMOBTAINING A GIVEN ENERGY DISTRIBUTION DURING LASER SURFACE PROCESSING WITH A SCANNING BEAM // 2022 pp. 57
  22. RSCI CREATION OF PARAMAGNETIC REGIONS IN ALLOYS BASED ON THE Fe-Cr-Ni SYSTEMS BY LASER INDUCED HEATINGCREATION OF PARAMAGNETIC REGIONS IN ALLOYS BASED ON THE Fe-Cr-Ni SYSTEMS BY LASER INDUCED HEATING // 2022 pp. 43
  23. Article
    Web of Science & Scopus
    Comparison of Metrics for Shape Quality Evaluation of Textures Produced by Laser Structuring by Remelting (Waveshape) // Micromachines, 2022 Vol. 13, No. 4, TOP10 doi
  24. Article
    Web of Science & Scopus
    Effect of Laser Treatment on γ-Phase Strength Characteristics in Iron–Chrome–Nickel System Alloys // Bulletin of the Russian Academy of Sciences: Physics, 2021 Vol. 85, No. 7, Q4 pp. 760-764 doi
  25. RSCI MODELING OF LASER THERMAL HARDENING PROCESS // 2021 pp. 167-169
  26. RSCI THEORETICAL AND EXPERIMENTAL ESTIMATION OF THE HEAT AFFECTED ZONE IN CUTTING GLASS FIBER REINFORCED PLASTIC WITH CW FIBER LASER // 2021 pp. 170-171
  27. RSCI PULSED LASER MODIFICATION OF AL2O3 CERAMICS TO CONTROLLING THE SURFACE WETTABILITY // 2021 pp. 180-181
  28. RSCI THEORETICAL AND EXPERIMENTAL ESTIMATION OF THE HEAT AFFECTED ZONE IN CUTTING GLASS FIBER REINFORCED PLASTIC WITH CW FIBER LASER // 2021 pp. 182-183
  29. RSCI INVESTIGATION OF THERMAL EXPANSION INFLUENCE ACCURACY OF THE STRUCTURING BY REMELTING PROCESS // 2021 pp. 187-188
  30. Article
    Web of Science & Scopus
    Modeling of laser surface modification processes of tool steel to predict the temperature distribution and modification zone // Journal of Physics: Conference Series, 2021 Vol. 2036, No. 1, Q4 doi
  31. Article
    Web of Science & Scopus
    Pulsed laser modification of Al2O3 ceramics to controlling the surface wettability // Journal of Physics: Conference Series, 2021 Vol. 2036, No. 1, Q4 doi
  32. Article
    Web of Science & Scopus
    Principles of Making Materials with a Spatial Distribution of Macroscopic Zones with Different Physical and Mechanical Properties // Steel in Translation, 2021 Vol. 51, No. 11, Q4 pp. 834-838 doi

Showing conferences for last 3 years

Conferences not found

The agreement on processing personal data is obtained in accordance with the Federal Law "On Personal Data" from 27/07/2006 N 152-FZ